Hi All,
We are having a couple of issues with SMS triggering I/O in the newer versions of firmware.
This behaviour is present on both the RUT955 and RUTX11 models that we have.
1 – Active Timeout doesn’t seem to work at all anymore. The IO will change state to Closed for example but does not revert to Open at the specified timeout.
2 – SMS Rules used to trigger based on the start of the message. For example: If the trigger was abc, and you sent abc 123 it would still work. This was desirable for our use case as the messages we're using have a set prefix but unique information after that. Edit: This was due to the colon issue.
3 – SMS Text for triggers can no longer contain colons for some reason.
Firmware we're testing with for reference...
CURRENT FIRMWARE INFORMATION
Firmware version |
RUT9_R_00.07.00.2 |
Firmware build date |
2021-10-19 23:41:22 |
Modem firmware version |
EC25AUFAR02A04M4G |
Kernel version |
4.14.221 |
Any assistance would be greatly appreciated, and I can provide any further data/logs requested to aid in troubleshooting.
We've tested of Factory Reset devices, and rolling back firmware to Factory Release for the 955 resolves all issues.
Thanks,
Evan