Question

Hi

I'm using a RUT955(192.168.82.1) with RMS VPN. If I connect a client using DHCP it works by VPN. But if i connect a device with static IP(192.168.82.247) i can't reach it by VPN. If i login to Rut's W-Lan i can reach both devices.

Rut955 is with latest firmware.

I hope someone has a hint for me

-Luca

Answer 1

Hello,

Can you share how you configured "Routes" on the VPN Hub? I think you should specify the entire subnet 192.68.82.0 255.255.255.0

Best regards.

Comments

Hi, I just added 192.168.82.0 but it still doesn't work.

---

Hello,

192.68.82.0 255.255.255.0 route specifies all devices in the same subnet, so you can remove 192.168.82.247 and 192.168.82.103 routes and leave only 192.68.82.0 255.255.255.0.

Another important thing is to check if Masquerading option is turned on in the RUT955 device, if not please turn on this option.

You can do this by navigating to the NETWORK > FIREWALL > GENERAL SETTINGS

Regards,

---

Hi

I can reach the PLC's webserver by browser but i'm still not able to login with codesys.

Any other idea?

---

Hello,

Can you clarify if you access your device with static IP via RMS VPN after changes were made?

Regards,

---

Hello,

Yes, i can access the device with static IP.

But the connection with codesys wors only from time to time.

-Luca

Answer 2

Hello,

I would like to ask you to send me the troubleshoot file of the RUT device. You can do it in a private message.

Regards,