Dear sirs
I am testing one FMB130 and I have configured the equipment as follows:
Ignition source: activated with DI1
Movement source : Accelerometer or GNSS
I am having problems controlling the sending of packets to the monitoring server in stop mode.
These are the parameters for data acquisition:
Min period: 120 sg
Min saved records: 1
Send period: 300 sg
When the ignition signal is on, and the movement signal is off, the FMB130 starts to continuously send packets to the monitoring server, for no apparent reason, and without any changes in its inputs or parameters.
The only way to stop sending packets is to turn the movement source back on, either with the accelerometer or with the GNSS.
Why does this happen if the send period has not yet elapsed?
I attach the configuration of the equipment
Regards
