FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
163 views 3 comments
by anonymous

We create 30 separate tunnels in cisco router against each RUT240 including updated firmware now we need to IPSEC configuration over this scenario for every. So please guide us and share the both device configuration.

Thanks..  

furthermore what is diffrance b/w BranchETH,ETH0 and ETH1 interface+ physical Setting on RUT240

by anonymous
can any one provide the cisco configration templeate

1 Answer

0 votes
by anonymous
Hello,

Below is the link which shows how to configure IPsec with Cisco.

https://wiki.teltonika-networks.com/view/Setting_up_an_IPsec_tunnel_between_RUT_and_Cisco_device

The brief explanation of interfaces is as given below,

ETH0 - The Physical Network card (All ethernet ports)

ETH1 - The WAN interface (Internet Connection)

Br-Lan (Bridge LAN) - Virtual interface that interconnects all LAN ports (In the case of RUT240,if WAN is configured as LAN then the br-lan will consist of WAN+LAN port)

Happy Networking !
by anonymous
Hi Thanks for the reply, can you share the cisco configuration as "Sh running " as your provided configuration is very typical style and we don't have understand.
by anonymous
Hello,

The above link was made sometime prior and i have no access to it currently, so i will not be able to share you the "show running config" file. But you can try online on how to set up the cisco VPN server and we can help you in setting up the RUT240 as clients based on that.

Regards,

Clive Simon Victor Pinto