Hello,
I have been trying to set up an IPsec tunnel (over 4G) between two RUT955 routers by following the guide (
https://wiki.teltonika-networks.com/view/IPsec_configuration_examples). The connection seems to be successfully established, and if I check the ipsec status in CLI on one end, I get (true IP censored):
Office-Office_c[1]: ESTABLISHED 70 minutes ago, 89.XXX.XXX.XXX[FQDN]...89.XXX.XXX.XXX[FQDN]
Office-Office_c{2}: INSTALLED, TUNNEL, reqid 1, ESP in UDP SPIs: c459d847_i c0b6c0b3_o
Office-Office_c{2}: 10.0.61.0/24 === 10.0.63.0/24
I am trying to establish the tunnel between the two subnets 10.0.61.0/24 and 10.0.63.0/24, and the routers have been given the LAN IPs 10.0.61.1 and 10.0.63.1 with Netmask 255.255.255.0. Even though the connection seems to be established, I am unable to ping from 10.0.61.1 to 10.0.63.1 in CLI (and vice versa). Also, if I connect devices with IPs 10.0.61.XXX and 10.0.63.XXX with Netmasks 255.255.255.0, I am unable to ping between them.
I have been looking around, and this seems to be a fairly straight forward setup. Is there something obvious I have missed? I have uploaded screenshots of the two IPsec configurations.
Sincerely,
Isthan