Hi there,
I enabled forwarding of NMEA data to the tcp server, but the only way I can see it upload to the server is if I set up the RS232 port as a tcp “server” mode with the same port, send the data out first, and receive it back. For my application I would like the NMEA data to upload directly to the tcp server address, but be able to periodically send packets to the same port through RS232/485 to as well. Please advise if this is possible with the RUT955.
Alternatively, if the device has to receive the NMEA data in order to forward it to the TCP server, is it possible to have both RS232 and RS485 simultaneously enabled and uploading to the same sever port, so that I may use one for the NMEA data and one for additional packets?
Any guidance would be greatly appreciated. Many thanks in advance!