Question

Hello,

I want use a RUTXR1 with two WAN Lines:

WAN1 with PPPoE for all "normal" use.

WAN2 also with PPPoE to use only for the phone-pbx.

For this I need to configure a route that only one internal IP (the PBX) should user WAN2, all other should use the normal WAN1

Possilbe??

Regards, Dirk

Answer 1

Hello,

Configure load balancing feature in rutxr1 and then use rule option in load balancing.
Ref below link which has this info.
https://wiki.teltonika-networks.com/view/RUTXR1_Failover#Load_Balancing

Let me know if it works?
If does not then please share max details for me to understand what is not working, a configuration or feature or device.

Comments

In first, thanks for your help. I struggle a bit with the rules.

I configured this:

wan - PPPoE provider

wan2 - 2nd provider gives me LAN with static IP

sim1 - Data sim

I configured failover, this is working fine. All Clients ware using the PPPoE line, whan this goes down they go to the LAN and at least, is this ist down, the go to LTE.

Now I make a VoIP rule where two internal IPs (192.168.200.161 and 162) shoud user wan2.

This is also working, i have my load "balanced" data on wan, VoIP on wan2, fine as well :-)

But now I cant configure that when wan2 goes down VoIP shoud use wan and possibly sim.

When I add wan to "member used" the VoIP machines use directly the wan, not the wan2.

Is there an option to configure a seperate failover in a rule ??

Regards, Dirk