Hello!
We want to use the RUT240 as a fallback internet connection for our existing infrastructure spread over Europe.
We are trying to achieve:
- Pass the external mobile ip on our existing router on site
- Use one port directly attached to the routers WAN port
- Use the LAN Port with a DHCP assigned address for snmp monitoring of the mobile connection
- Power the device trough passive PoE, to move it away from the server room but keep it ups-powered
I already managed to use bridge- / or passthrough mode with the "LAN" port of the RUT240.
But it did not work with the "WAN" port, no matter what I came up with.
We are using the RUT240, with latest firmware version. (RUT2_R_00.07.01.4)
I also tried the old interface which came with firmware version. (RUT2XX_R_00.01.14.5)
Thank you in advance,
Manuel Gayer
Neumann&Müller GmbH & Co. KG