FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
1,378 views 5 comments
by
by
Yes, the PUCK-5 can be used with this router, no problem.

Kind Regards

Poynting Europe
by anonymous
I can't get the PUCK-5 to give any GPS location information. There is another question on here that suggests the PUCK doesn't work with the latest firmware (which I have). So, I'll monitor that.
by anonymous

I've downgraded the firmware from 00.06.02 to 00.06.00.4 but I still don't have any GPS data (zero satellites). This is a new RUT-955 and PUCK-5 and I've never had a working GPS (although I have another system that is picking up 9 satellites). I'm using the GSM and GPS on the PUCK-5 with two separate WiFi antenna but I'm assuming that the sections of the PUCK-5 are not interconnected in any way.

by anonymous
I've bought a Teltonika Combo and that worked first time. Map works but it won't let me set a GeoFence for my current position but that's another question on here!

1 Answer

0 votes
by anonymous
Hi,

Requirements for GPS antenna:

Frequency:             1561 - 1615 MHz

Polarisation:           RHCD or linear

Antenna V.S.W.R     <1.5

LNA V.S.W.R             <2

LNA noise figure     <2dB

Power:                     2.7 - 3.6V or wider range

Supply current:      <15mA

Cable:                      RG174 or better

Connector:             SMA Male

If your antenna has similar parameters, then you could try to use it.
by anonymous
I never did get the PUCK-5 to work but the Teltonika Combo does.