WIKIABOUT

FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

Most popular tags

rut955 rut240 rut950 rutx11 rms vpn to openvpn wifi not sms trb140 firmware connection - ipsec on rutx12 rutx09 modbus
We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.

Is RUTX11 input floating or pulled up/down?

0 votes
152 views 0 comments
by anonymous
Hey everyone! The question is in the subject - is the input pin on the RUTX11 power connector floating, or is it internally pulled up or pulled down? My power input is a little bit higher than the max input voltage (32V), so I'd be happy to control the input by connecting it to the ground or leaving it floating, instead of installing an additional "voltage dropper".

Thanks!

1 Answer

0 votes
by anonymous

Hello,

The input pin of RUTX11 is not floating. You can configure the initial state via WebUI in the Services -> Input/Output section. You can also toggle the state by sending SMS message, if you have a rule configured in Services -> Mobile utilities -> SMS utilities section. Otherwise, you will need a voltage divider not to exceed the recommended 30V value.

Best regards,

Žygimantas