Question

We use RUT 240 and want to powering with PoE from Cisco C1000.
RUT 240 isn't started at all.
Even tested with PoE injector, only LED's are blinking.

Which PoE Injector and or Switch with PoE are supported ?
Or should be a special config applied to support PoE ?

Answer 1

Hello,

RUT240 can only be powered by passive PoE injectors. From what I've gathered, the C1000-16p supports both IEEE 802.3af PoE and IEEE 802.3at PoE+ standards. Now RUT240 is not compliant with neither of these standards and, due to that, it is not powered by the switch. Please check this page for RUT powering details.

Best regards,

Comments

Thanks, for the clarification.
Even with PoE Splitter 12V/2A the RUT240 cant be powered correctly.
Any recommendation for PoE Splitter or PoE Injector are welcome.