Hello, thank you for your question,
while there is no possibility to go to the I/O menu directly via Webui, you can set up SMS commands to configure I/O's depending on your needs.
More information on RUT955 Mobile Utilities could be found here:
https://wiki.teltonika-networks.com/view/RUT955_Mobile_Utilities
To set up SMS commands depending on your needs, navigate to:
Services -> Mobile Utilities -> SMS Utilities
In the menu, you will see multiple preconfigured SMS Rules. For example, to change I/O state, send an SMS that looks like this:
admin01 ioset
Depending on your device admin password, the syntax would need to be adjusted accordingly.
If you use Teltonika RMS system, there is a possibility to use RMS Task Manager and send commands from there.
You can find more information about it here:
https://youtu.be/u5VUonYuNiw
To switch I/O’s with Task Manager you can use UCI commands. More information could be found here:
https://wiki.teltonika-networks.com/view/UCI_command_usage
For example, to set Isolated Output state from off to on, you could use this command:
uci set ioman.dout2.value=1
Best Regards,
Justas