Is the IP 10.0.0.250 of RUT240 a LAN IP or IP of wireless client interface provided by RUT955 DHCP? Is the LAN IP of rut240 also within the subnet of 10.0.2.x?
I have replicated a similar scenario with the following setup and configuration:
RUT955 (10.0.0.254) -------- WIFI ------- RUT240 (10.0.2.1) ----------client device (DHCP lease from RUT240 10.0.2.x)
RUT955 LAN settings:
Static route in RUT955 (10.0.0.194 is the IP provided to RUT240 wireless interface):
RUT240 LAN Settings:
RUT240 Wireless client interface :
Modify RUT240 firewall zone forwarding for LAN zone by adding:
Pings in RUT240 are enabled by default, thus the device should reply by now, however, in order to access the device itself, remote HTTP(S) or SSH needs to be enabled too in RUT240.This can be done in System -> Administration -> Access control:
With this setup, I was able to access device 10.0.2.128 connected to RUT240 from device 10.0.0.113 connected to RUT950.