FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
180 views 2 comments
by anonymous
RTU360 has Modbus Slave and Modbus Master already however the Modbus Master only reads data for alarm settings from the UI interface. Is there a way to map the registers from the Modbus Master to internal addresses specified in Modbus Slave? Just like the DNP3 Master has a local address and a remote address configuration.

1 Answer

0 votes
by anonymous
Hello,

I would like you to clarify the operating principle of the MODBUS concentrator and the end result that you want to achieve.

Best regards,
by anonymous
I would like to pull registers from Modbus slave devices and save the data into the internal Modbus master registers. For instance, pulling 10 registers from slave device 1 and same the data into the router's internal (127.0.0.1) registers 40001-40010. Pulling 20 registers from slave device 2 and save the data into the router's internal registers 40011-40030.
by anonymous
Hello,

Unfortunately, such a feature would require additional development or a solution via a custom script, both of which are beyond the scope of this forum.

Best reagrds