FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
1,687 views 3 comments
by
with the RUT955 is it possible to check the status of the digital input through SNMP queries?

if it was not possible, can it be implemented?

1 Answer

0 votes
by anonymous

Hello,

It is possible with SNMP variable DigitalInput.0, OID .1.3.6.1.4.1.48690.5.1.0.

You can find this information here: https://wiki.teltonika.lt/index.php?title=SNMP#SNMP_Variables_list

Best answer
by

I would like to know the value of the pin, if it was at logic level 0 or 1. with the analogue input I can know it through the OID .1.3.6.1.4.1.48690.5.6.0 but with the digital input I can only see if active or inactive, not the actual value.

Can it be implemented?

by anonymous

Well the values 0/1 of the digital input correspond with inactive/active. While the analogue input can have a whole range of values. So the purposes of these inputs are different.

by
ok, my goal is to cyclically check the digital input with SNMP queries.

at the input I have a voltage ranging from 12V to 0V, so when the digital input is at 12 V I go to interrogate the state and must be at 1, when I have 0V must be at 0, it is possible to read it as numerical value and not as a string of characters ACTIVE / INACTIVE?