WIKIABOUT

FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

Most popular tags

rut955 rut240 rut950 rutx11 rms vpn to openvpn wifi not sms trb140 firmware connection - ipsec on rutx12 rutx09 modbus
We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.

How to configure Rut240 to be WiFi Client

0 votes
1,295 views 0 comments
by anonymous
Hi, I am wanting to use the Rut240 as a WiFi client. This is so I can connect a remote PLC to the Rut240 LAN port, so the PLC can make use of the WiFi that is in the area.

I am able to set up the Rut240 on the WiFi network, but I have no idea how to connect the LAN port through to the WiFi Interface. I cannot ping the PLC ip address through the WiFi network, and I need to be able to.

Thanks

1 Answer

0 votes
by anonymous

Hello 

To set RUT240 as Wi-Fi client please refer to the below link for details: WebUI-> Network-> Wireless

 https://wiki.teltonika-networks.com/view/RUT240_Wireless#Client_Mode

Once the RUT240 is acting as Wi-Fi client, Connect the PLC to the LAN port of RUT240 to provide internet to the PLC.

Or if the PLC can be connected through Wireless you can connect the PLC to RUT240 Through Wi-Fi and you will be able to ping the PLC once connected to the RUT240.

Best Regards,

Akash R