Hello, sorry to bother.
I do have a RUT240 in the field which drives me crazy.
RUT240: FW: RUT2_R_00.07.03.1
It is set up as WiFi Bridge to give clients in LAN internet access.
WiFi: SSID: secret ip: 192.168.29.20/24
LAN: network: 172.16.6.0 ip: 172.16.6.1/24
It was all tested and worked till a FW update of the router two month ago.
RUT240: is connected to WiFi,
gets its IP via DHCP Server.
CLI/SSH/troubbleshoot of ping 8.8.8.8 is getting response
logs in to VPN-Server and sets up route 172.16.0.0/12 trough VPN (no internet access)
rest traffic supposed to go trough WiFi
Im logged into VPN Server as well. 172.16.1.4 and can ping RUT240 and all the devices in the network 172.16.6.0/24 and I have access to the devices WEB-GUIs. So I can say for sure, the RUT240 has internet access and allows me to communicate with it and the devices over the VPN tunnel.
But a few month ago, the clients lost connection to the internet.
Only thing happened was an OTA FW update of RUT240.
I doubble checked routing tables and I'm stuck.
Do I need to change or add routes/zones in FW settings?
Sipmly I do want traffic go out WiFi and not WAN or mobile.
route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.29.254 0.0.0.0 UG 1 0 0 wlan0
10.10.16.0 10.10.16.1 255.255.240.0 UG 0 0 0 tun_c_gcn
172.16.6.0 0.0.0.0 255.255.255.0 U 2 0 0 br-lan
192.168.29.0 0.0.0.0 255.255.255.0 U 1 0 0 wlan0
reference RUT24: inet trough WAN (eth1)
route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.178.1 0.0.0.0 UG 2 0 0 eth1
10.10.16.0 10.10.16.1 255.255.240.0 UG 0 0 0 tun_c_gcn
172.16.7.0 0.0.0.0 255.255.255.0 U 1 0 0 br-lan
192.168.178.0 0.0.0.0 255.255.255.0 U 2 0 0 eth1
Is routing properly and having normal internet connections for rest of traffic.
I have WEB-GUI access to the devices in the network, but their FW does not give me the ability to troubbleshoot or trace the connection.
How can I test from within RUT240 if packets get received and which way they take from out the network?
Or any other tips and tricks how I get this up and running again.
Preferably without loosing VPN access troughout this (few hours drive to site).
Best regards, and thanks a lot.