subscribe to our Youtube
I am trying to set up monitoring of traffic with PRTG(188.8.131.522 x64) on a RUT950 router(RUT9XX_R_00.06.05.3), I have PING and HTTP working but I cant get anything else like traffic flow on a routers port. I have SNMP enabled and the credentials set up, community name etc, I am using SNMPv2. When I try and add a sensor using SNMP protocol for bandwidth in PRTG it fails. Has anyone had experience with these two systems?
I have tried the tool with RUT955 and it seems to be working.
Double-check all of your settings and ensure that you are configuring SNMP monitoring for the RUT955 and not some other device.
I have downloaded the MIB file and imported to PRTG, but I can only get the following parameters in this picture. I have tried Auto discovery and manual. I have checked the community name and I am using SNMPv2 but I cant seem to be able to add additional sensors. Do you have any other suggestions ?