FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
651 views 3 comments
by anonymous
Nach dem Update auf 7.03.3 ist es nicht mehr möglich sich einzuloggen. Auch per Lan Kabel keine Möglichkeit. "Verbindung fehlgeschlagen"

Wenn dann mal die Anmeldemaske kommt und man Admin und PW eingibt, sagt er "Device unreachable.."

Auch mehrfaches Reset per Knopf bringt keine Lösung.

Mit mehreren Browsern probiert. alles negativ.

Per Wlan wird der Router angezeigt, Verbindung aber auch nicht möglich. Er will dann immer ein WPA2 Passwort. Welches ich ihm gebe, er es aber nicht nimmt. Die Maske kommt immer wieder.

Seit Zwei Tagen mache ich nichts anderes und k.... langsam. So einen Müll hatte ich schon lange nicht mehr...

Gibt es noch eine Idee bevor es in die Tonne fliegt?

5 Answers

0 votes
by anonymous

Hello,

Please try performing device recovery via bootloader menu. The procedure is described here: https://wiki.teltonika-networks.com/view/RUT9xx_Firmware_via_The_Bootloader_Menu.

Be aware that there a two different version of bootloader available on the devices. The old and the new version. The old bootloader version only supports legacy firmware version, while the new bootloader version only support the RUTOS 7 and above firmware versions. Examples of both are provided in the link above.

Best regards,

0 votes
by anonymous

Hallo, danke.

Ich habe es jetzt nache dem 5 x Rest Button drücken geschafft - er hat sich offensichtlich auf Werkseinstellungen zurück gesetzt und ich kann mich per Kabel einloggen.

Ich kann auch das vorhandene WLAN finden und einbinden.

Aber der Status des Routers ist auf 0%

was muss ich einstellen?

vielen Dank

by anonymous
If by 0% you refer to router's wireless access point's interface, it is because you have no wireless clients connected to the router. The percentage shows relative link quality by measuring signal/noise ratio.

Best regards,
0 votes
by anonymous
und wie verbinden ich den drahtlosen Client?

Ist es ein client oder Acces Point?

Eine genaue Anleitung wie man das einrichtet wäre sehr hilfreich...
by anonymous

Your router is now both, wireless client and wireless access point:

It has both interfaces up and running.

It means that as a client, RUT955 is connected to another access point, which can be used as an internet/WAN source.

When acting as an access point, other devices (laptops/smartphones) can be connected to RUT955 by connecting to its SSID, which starts with RUT955-B.

From the configuration standpoint, interfaces section seems to be set up correctly, your LAN subnet does not overlap with the subnet of the access point you have connected your RUT955 to.

Best regards,

0 votes
by anonymous
ich verstehe nicht ganz... sorry.

Der RUT955 soll nicht als Acces Point fungieren.
Weil Acces Point wäre ja kabelgebunden oder?

Er soll wlan ein Wlan signal an "seine" Geräte weiter geben. Man loggt sich bspw. mit Handy und Tablett auf dem Rut955 ein.

Ich bin jetzt per Kabel an dem RUT angeschlossen weil ich ja per WLAN nicht drauf komme!

Bitte um eine Hilfe/Lösung
by anonymous

RUT, among its other features, is an access point. Below is an excerpt from marketing material:

To connect to RUT955 access point, check the SSID and password of access point's interface:

Find that SSID in the list of available WiFi networks on your PC or smartphone and connect to it:

Best regards,

0 votes
by anonymous

so, Nase voll.

Altes OS aufgespielt und immerhin komme ich schnell und problemlos per LAN drauf.

Ich kann alles ändern.

ABER: per wlan keine chance. Ich kann mich nicht per wlan verbinden.
Was stimmt nicht?