Hi,
I am trying to connect two LANs to access devices on Teltonika RUTX50 LAN
================================================================
Overview:
================================================================
NET1: Teltonika RUTX50, 10.10.10.1, Internet via 4G mob1s1a1. This has the devices I want to access on it.
NET2: PFSense, 10.20.10.1, Internet via starlink. I need these devices to access 10.10.10.X, which works.
NET3: Teltonika RUTX09, 10.30.10.1, Internet via 4G mob1s1a1. I need these devices to access 10.10.10.X but I am stuck.
All Teltonika on FW 07.04.1
================================================================
================================================================
Network 1: Teltonika RUTX50, 10.10.10.1
================================================================
NET1 PORT1: Connected to Switch with the devices I want to access on it.
NET1 PORT2: Connected to PFSense seperate network card - NET2 PORTX.
NET1 PORT3: Connected to NET3 PORT3 (RUTX09)
================================================================
================================================================
Network 2: PFSense, 10.20.10.1
================================================================
NET2 PORTX: In PFSense, configured static=10.10.10.4 mask=255.255.255.0 gateway=10.10.10.1.
No other settings, works perfectly coming from 10.20.10.X to 10.10.10.X. Does not work from 10.10.10.X to 10.20.10.X, which isnt important though would be nice to know how.
================================================================
================================================================
Network 3: Teltonika RUTX09, 10.30.10.1
================================================================
NET3 PORT3: Cosidering PFSense is working, this RUTX09 must be where the problem is.
Made PORT3 seperate on VLAN ID3 as follows:
VLAN ID1: LAN 1=Untagged, LAN2=Untagged, LAN3=Off, WAN=Off
VLAN ID2: LAN 1=Off, LAN2=Off, LAN3=Off, WAN=Untagged
VLAN ID3: LAN 1=Off, LAN2=Off, LAN3=Untagged, WAN=Off
Made interface "NET1", configured static=10.10.10.5 mask=255.255.255.0, has gateway=10.10.10.1.
This RUTX09 CLI can ping 10.10.10.X, but nothing on 10.30.10.X can access 10.10.10.X.
I have tried adding a static route to 10.10.10.0 with 10.10.10.1 as the gateway.
I have tried the same with 10.10.10.5 as the gateway.
I have tried to configure the firewall to allow access between LAN and NET1.
Nothing works but I know I am just missing something here.
As with NET2, it would be handy to know how to allow 10.10.10.X to 10.30.10.X as well.
================================================================
It would be great if somebody could help me with this as I am stumped as to where to go next!
Thanks,
Kevin