FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
514 views 1 comments
by anonymous
Hi,

When i edit a parameter in the general wifi setup (example: change the channel) i got a error 'failed to edit configuration' when i try to save the settings.

It's a RUT955 with latest firmware RUT9 R 00.07.04.2. I had the same issue with previous firmware.

Many thanks for help.

1 Answer

0 votes
by anonymous

Hello,

I did not replicate your issue.

I assume it might be related to the fact that previous firmware updates were performed with keeping the configuration settings from those versions.

The easiest solution, I would like you to try, is to perform your device's reset to factory default settings and see if that resolves it.

Alternatively, you can try making configuration changes by logging to your device via CLI/SSH with the following commands:

  • uci set wireless.radio0.channel='<channel_number>'
    • Replace <channel_number> with the number of the channel you want to set
  • uci commit 
  • /sbin/wifi reload

Best regards,

by anonymous

I had a similar issue with the rms settings.

I done an upgrade with keeping the configuration settings.

Did you know a way to "reset rms default setting only" ? 

By the way, 

  • after reseting with default setting : no change, 
  • reinstalling the firmware (with reseting configuration): fixed, but i had to reconfigure everything by hand ...

Thanks in advance,