Question

Good Day All

 We are using the Teltonika RUT240 units.

 I have a project where the machine is going to the Seychelles and will need to be able to access it remotely.

 The plc that will be connected to the router can work with VNC and has a webserver built into it.

 I have 2 options.

 1)      <!--[endif]-->Get a global sim card that will work in the Seychelles just need to make sure the router works there as well.

<!--[if !supportLists]-->2)      <!--[endif]-->Find an option to use the Lodges internet that is already there to connect to the router and gain access that way. ( we will not be able to get anything changed on the Lodges router or network connection) So basically i would have to be able to connect their network to the Wan port and access the router and devices connected to the teltonika router.

Answer 1

Hi,

1. Router supported bands:https://wiki.teltonika.lt/view/Frequency_bands_supported_by_Networking_devices#RUT240

2. For this you should made port forward in "Lodges router" to RUT240 for access from network.

Comments

Hi
 

Thanks for the answer.

unfortunately i cant access or make changes to the lodges router.

---

Then will be difficult to reach router.