Question

I can not use "Network Frequency Bands" options anymore to manual lock my connections band to LTE, I just get connected to WCDMA.

I have to set "Service mode"  Automatic and "Connection method" Automatic to connect to LTE, but I want to lock my connection to LTE band 8, it is much better speed where. I think it has working before.

I have a Rut955 and firmware 00.06.04.3

Answer 1

Hello, 

You can select wanting band in WebUI -> Network -> Mobile -> Connection method -> Manual
Please take note that You can't force specific band usage in WebUI, you can choose it if module detects more than one band on selected network service. If all bands are unchecked any band will be used.

P.s. You can lock it via SSH/CLI

• More on CLI/SSH -> here
• More on LTE band lock -> here

Regards

Comments

The command gsmctl -A 'AT+QCFG="band",0,80,0,1' gave me what i wanted.

Thanks

Answer 2

Hello.

We had checked the FW ver.: RUT9XX_R_00.06.04.3 and we are able to setup bands manually including BAND 8.

Please upgrade again the firmware but this time please UnCheck the Tick mark "Keep all settings" under the Firmware Tab. This is to ensure a fresh install with no possible old configurations interfering.

https://wiki.teltonika.lt/view/RUT955_Firmware#Firmware_Upgrade_Settings

Also remember that at the end of Mobile Tab, you have to set the "Connection method" to manual and then select the bands you want to activate.

https://wiki.teltonika.lt/view/RUT955_Mobile#Network_frequency_bands

Comments

I will try to do that when I have a little more time.

Thanks