FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
950 views 1 comments
by

Hi 

Running 6.04.5 firmware on RUT950 & newbie now confused by passthrough/bridge mode & its configuration for a Wired WAN connection (NOT WIRELESS)

I have a Satellite connection & obtain a public IP from the ISP RTU via lan to 950

have it plugged into rtu WAN from there LAN out to a Unifi Security Switch WAN  (It Requires the default 192.168.1.1 Address & DHCP server functionon )& from there LAN to my internal LAN

Which setup do I need & how to assign the IP addresses Needed Please as both can not have the 192.168.1.1 & be the DHCP server

Purchased from a supplier who advised the unit would do the job well 

Now the supplier has advised they do NOT provide technical support

have spent 20+ hours trying to figure this out but get internal network working Topology says internet is connected but but NO device internet connections work

All is fine if the USG is not connected

Appreciate any help to de - confuse me & restore Faith in this product

1 Answer

0 votes
by anonymous

Hello.

I'm still a bit confused. From your description I can't completely get a picture of your topology.

As far as I understand you can't have both devices with 192.168.1.1

You can change the default gateway of the RUT950 to any one you want/need. Check the link below to do that.

IP address ip; Default: 192.168.1.1 IP address that the device uses on the LAN network

https://wiki.teltonika.lt/view/RUT950_LAN#General_Setup

by

have uploaded a topagrphical diagram

Can you please advise the correct settings for Passthrough or bridge that allows internet use from stations as it seems not to work

Is this also part of or similar to this issue here https://community.teltonika-networks.com/8243/rut9xx_r_00-06-04-firmware-passthrough-not-working