Hi,
This feature is not yet available, but it will be added to future RUTX firmware.
Meanwhile, you can set it up via command line. Login via SSH/CLI and execute these commands:
- uci set network.lan.ifname='eth0 eth1'
- uci set network.wan.enabled='0'
- uci set network.wan.disabled='1'
- uci commit
- /etc/init.d/network restart
After these changes, the WAN port will become a LAN port.
To restore previous changes either do a factory reset (which will reset everything) or execute these commands:
- uci set network.lan.ifname='eth0'
- uci delete network.wan.enabled
- uci delete network.wan.disabled
- uci commit
- /etc/init.d/network restart