WIKIABOUT

FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

Most popular tags

rut955 rut240 rut950 rutx11 rms vpn to openvpn wifi not sms trb140 firmware connection - ipsec on rutx12 rutx09 modbus
We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.

RUT955 digital input (galvanically isolated) shutting down RUT955 when going HIGH

0 votes
257 views 0 comments
by anonymous
Hi. I have an issue with a RUT955, which is powered via 24VDC passive POE on lan 1 port. I have an external power source which is using pins  2 and 7. When going from high to low, the state switches fine. When going from low to high, the RUT955 power cycles. The input is 24VDC (pretty much exactly). I tested it originally when powering the RUT955 directly via 24V, but not when using LAN1 24v poe. Has anyone come across this?

1 Answer

0 votes
by anonymous
Hello,

As I understand when you use galvanically isolated input, when powering device through PPoE going from low to high logic it reboots yours router, but if you power router directly with Power Supply Adapter, it does not reboot in same scenario? And you do not have any rules configured for router to execute on input logic change?