Question

Hello, i just bought a RUT950 router and after doing the hardware, as specified in the brochure "Quick Start Guide v2.1", I try to connect but without success.

The Router does not want the wifi password which is noted on the box.

What should be done ? Thank you for your help.

Answer 1

Hi,

To change your wireless access points passwords you can follow this instruction right here:

https://wiki.teltonika-networks.com/view/RUT950_Wireless#General_Setup_2

EB.

Comments

Thank u for the reply but i see the network RUT950 on my computer but i do not have access to it (it does not want the password from the box) and also i don't have access to the setup.

I reset the router but it's still the same problem.

So i can do anything ! I m lost. Thank you for your help.

---

Hi,

Please make sure you're holding a reset button longer than 5 seconds to restore defaults to your router.

If that doesn't work, look for this alternative:

https://wiki.teltonika-networks.com/view/RUT9xx_Firmware_via_The_Bootloader_Menu

EB.

---

Hello,

It's ok now, thank you for your help.

I hadn't reset the button for more 5 seconds and that's why it didn't work

Regards,

JB.

---

Hello again,

glad you managed to solve your issue.

EB.