WIKIABOUT

FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

Most popular tags

rut955 rut240 rut950 rutx11 rms vpn to openvpn wifi not sms trb140 firmware connection - ipsec on rutx12 rutx09 modbus
We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.

Lock the frequency to 1800

0 votes
382 views 5 comments
by

Hi,

I have a rut950 modem (see the spex bekow). I am not able to lock the LTE frequency to 1800 mhz. I dont see the option to choose the band in the webui. I have tried the gsmctl -A AT+QCFG / gsmctl -A AT^SYSCFGEX commands but I only get ERROR as the response. I cannot either see the used band in the WebUI under Status/Network/connected band (I only see a - character). Could it be that my hardware model is to old to be able to lock the frequency/band?

//klaus

Product code RUT950GG12C0
 

Batch number 0030
Hardware revision 0808

ModelLE910-EU V2FW version20.00.402

by
My modem connects to a cell that has both 800 and 1800 frequencies. The problem is that the rut950 uses the 800 Mhz frequency that is much slower than the 1800 mhz frequency. My iphone connects to the 1800 mhz frequency and is much faster that my rut950 modem even though the rut950 modem has a external antenna that is directed to the cell.

//klaus

1 Answer

0 votes
by anonymous

Hello, 

Regarding this query of yours you can do it on the Network > Mobile > Network Frequency Bands. 

You can refer to this link for more information: https://wiki.teltonika-networks.com/view/RUT950_Mobile#Network_frequency_bands

Hope it helps 

Regards,
Jerome

by

The problem is that I don’t have the ”Frequency Bands” option in my router. My firmware version is RUT9XX_R_00.06.05.1. 

by anonymous

Hello, 

Can you upgrade the firmware to the latest one available? 

You can upgrade the firmware in the System > Firmware Tab
https://wiki.teltonika-networks.com/view/RUT950_Firmware_Downloads

Hope it helps

Regards,
Jerome

by
Upgraded to newest firmware. I am still missing the ”Frequency Bands” option under Network > Mobile. I think that my hardware version doesn’t support it ( see my specs in my original question).
by anonymous
Hello,

Sorry for the miscommunication i have checked your device model and it is using an OLD LTE module inside that is why the network frequency band selection is not available on your device.

Thank you and have a nice day!
Stay Safe

Regards,
Jerome