Hi,
Yes I have already configured WAN, LAN and some VLAN interfaces.
Actual setup : identical routing for 2 VLANs
VLAN101 ---> failover between WAN_mobile (primary) and WAN_wired (secondary) ---> Internet
VLAN102 ---> failover teween WAN_mobile (primary) and WAN_wired (secondary) ---> Internet
My goal is to make VLAN101 going to Internet only via WAN_wired, whatever happens :
VLAN101 ---> WAN_wired ---> Internet
VLAN102 ---> failover teween WAN_mobile (primary) and WAN_wired (secondary) ---> Internet
A static IP address is given by DSL ISP, so wired WAN aleays have the same IP,
So I did edit the VLAN101 interface as you mentionned, and entered the IP address of WAN_wired interface into the IPv4 gateway field, save changes, rebooted.
But after that the VLAN101 still use the (primary) WAN_mobile and not the WAN_wired interface ...
Any setup exemple using other parameters or routing / firewall so VLAN101 traffic to Internet could go via WAN_wired interface only ?
Thanks for your help,
Olivier