Question

Hello, I want to setup a static IP with a given address pool like below for example

IP address: 192.168.114.121

IP mask:      255.255.255.248

IP address pool: 192.168.112.122  up to 192.168.112.124

I wanted to change the default router (RUT950) admin address 192.168.1.1 to a new one 192.168.112.121,but with three additional addresses for different devices 192.168.112.122,192.168.112.123 and 192.168.112.124.

I tried to setup these according to the manual but every time I do this, I cannot access the router unless I reset it over again.

I know there must be something silly that I missed but still.

Can someone help me with this particular example on Teltonika RUT950.

Answer 1

Hello,

First thing that came up in my mind is that you forgot to change your PC network adapter settings from default. If you are using windows, click Start > Settings > Control Panel > Network and Internet > Network and Sharing Center > Change adapter settings. Select the connection that you are using to connect to your router and right click > Properties >  select Internet Protocol Version 4 and press Properties:

Default gateway is your router LAN IP address.

Then open your browser and you will reach your router by inserting  192.168.112.121 to URL tab.

Best regards.