Question

I want to use RUT955 RS232 and RS485 outputs as two independet Serial TCP Servers. Is it possible run both tcp servers at the same time?
I did a quick test and rs485 server started working only when rs232 was disabled. But maybe I did something wrong.
Thank you.

Answer 1

Hi,

Have you set different ports for your Serial TCP server connections?

If yes then could you send me your troubleshoot file, both RS232 and RS485 configurations and some screenshots for clarity?

You can send all of these files via private message.

EB.

Comments

I've solved it. Both ports are working now. Solution was to fill Allowed IP.

Problem was not filled Allowed IP. I added WAN interface but Allowed IP has remained empty for both RS232 and RS485. I thought not filled Allowed IP = 0.0.0.0/0. In this scenario RS485 was working only when RS232 was disabled. When both RS485 and RS232 were enabled, only RS232 was working.

I would recommend to force to fill Allowed IP in GUI when an interface is added (or fill 0.0.0.0/0 as default vlue).

Anyway thanks for reply.