My RUTX11 does not want to restart after a power cycle. When I turn off power to the device and turn it on again I get a light on the power indicator and a light on the connected ethernet ports, but no flashing sequence indicating the unit is booting. If I turn off the power again and hold the reset button for 6 seconds, it correctly boots into my saved User Default configuration and resumes working normally until the next time power is cycled off/on.
This is installed on a boat, so power will be cycled on and off periodically.
The device is powered through a regulated 12v laptop power adapter connected to the boat's 12v system. Same behavior when connected using the original AC adapter.
RUTX11, RUTX1110XXXX, S/N 1110839920, Rev. 0808, Batch 0024, FW version RUTX_R_00.02.06
I originally had the FW version RUTX_R_00.02.06.1 installed, but that version seemed to completely lose the configuration on reboot.