FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
485 views 2 comments
by anonymous

Give up...

VPN client in windows 10

fw version: 

RUTX_R_00.02.06.1

model: RUTX11

Changes list:

1) Factory reset;

2) change IP subnet to 192.168.0.0/24

3) Services >VPN> IP sec

3.1) preshared key : ********

Connection settings:

mode -> start

type  -> transport (if i changing to Tunnel - cant connect to VPN from client pc)

Bind to -> my L2TP profile

Key exchange .) ikev1 (if change to ikev2 - vpn client cant connect)

everything else by default.

NEXT

L2TP configuration

4) Local IP: 192.168.0.1

5) Remote IP range begin: 192.168.0.20

6) Remote IP range begin: 192.168.0.30

7 username and pass

8) blank L2TP Client ip box

NO MORE CONFIGURATIOOOOONNNNNN

connecting, vpn working, but GW 0.0.0.0

where is problem??? where I need to configure it??

1 Answer

0 votes
by anonymous

Hello, 

Regarding this issue of yours, I would like to confirm that your RUTX11 is having a Public IP address. Next is double-checked your config and use this link for reference: Connecting to the office network remotely from your home via VPN (L2TP over IPsec) using RUTX - Teltonika Networks Wiki (teltonika-networks.com). Lastly, try to check what is firmware are you using for the said device if it is a bit old kindly update the firmware to the latest available one. 

Firmware Link: RUTX11 Firmware Downloads - Teltonika Networks Wiki (teltonika-networks.com)

Regards,
Mellow

by anonymous
by anonymous
Hi,

Nice to hear that :)

Regards,
Mellow