Question

Not sure if asked before..

I have attached a diagram to help......Im wanting to connect the RUT955 to the solar controller via RS232 to automatically retrieve solar stats etc. I would then like those stats to be sent to a central location for our website to access and use for "live" viewing.

How can i make this happen

Any help would be appreciated.

Answer 1

Hi,

In order to set-up your RUT955 for use with your solar controller please read this part of the wiki:

https://wiki.teltonika-networks.com/view/RUT955_RS232/RS485

And here's the wiki explaining how to use Data to server functionality:

https://wiki.teltonika-networks.com/view/RUT955_Modbus#Modbus_Data_to_Server

EB.

Comments

Hi EB

Thanks for the advice.

To be sure, in regards to the RS232 side of things, i would configure for "console" only....?, i wouldn't need to configure as "mode client" or "mode server"

from there move on to the data server functionality...?

---

1. You would need to connect your solar controller through RS232.

2. Set it up as RS232 slave (if it's not automatically set like that).

3. Set up rest of the configuration here: https://wiki.teltonika-networks.com/view/RUT955_Modbus#RS232

4. Use Data to server to send information through MQTT or HTTP(S) protocols: https://wiki.teltonika-networks.com/view/RUT955_Modbus#Modbus_Data_to_Server

EB.