FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
130 views 1 comments
by anonymous
I/O jugger work fine when input1 trigger relay but when take analog input voltage to conditions it stop workin.. even if delete analog voltage condition then nothin work... i have to delete all generals and do everything again

1 Answer

0 votes
by anonymous
Hi,

What is the device and firmware version of it?

Have you tried resetting/reflashing the device with the newest firmware?

I/O juggler was tested on 07.00 firmware version and had no issues, so we will need the most detailed reproducing steps.

EB.
by anonymous

Firmware version: RUT9_R_00.07.00

Firmware build date: 2021-07-15 05:33:29

Modem firmware version: EC25EUGAR06A03M4G

Kernel version: 4.14.221

Do you think this should work if voltage too low lamp not switch on
Trigger: Input1 state HIGH,  Action:light
Conditions "lowvolt": ADC/ALC, input 6,9, outside range, min 12 max 14
Action "light": output, relay 5,10, state open, conditions: lowvolt

what is different or is that matter either i put that conditions check trigger or action section