8323 questions

9785 answers

15569 comments

13914 members

0 votes
52 views 0 comments
by

<This is not a question - it is a confirmation>

Ahmed (Thanks Ahmed!) confirmed that Firmware Vs 7 needs work and appears to have a problem with WiFi as primary LAN.

As per Ahmed's recommendation, I have downgraded to release 6.08.3 and I can confirm that the WiFi client can now be set to be the primary WAN. I have tested by turning WiFi off and the RUT switches easily to Mobile and back again when WiFi comes on.

Good outcome

You have to first move the Wireless link to the top and then you will be able to scan for the local AP you want to connect to. (do this under Network >> WAN)

Once done, all is good

Reference here too, but older firmware

https://wiki.teltonika-networks.com/view/RUT230_WAN

Colin

-----

1 Answer

0 votes
by
Hello,

Yes , whatever you want as primary make it Main WAN in the left side , secondary and third WAN could be selected from sort that is by moving up and down . Also save the settings after applying any setings.

Thanks