WIKIABOUT

FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

Most popular tags

rut955 rut240 rut950 rutx11 rms vpn to openvpn wifi not sms trb140 firmware connection - ipsec on rutx12 rutx09 modbus
We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.

Rutx12 RUTX_R_00.07.00 Wifi 5GHz not starting and no errors shown

0 votes
200 views 2 comments
by anonymous

FW: RUTX_R_00.07.00 on RUTX12

Wifi 2.4Ghz starts without problems.

But WIfi 5Ghz I tried many combinations, but none of the can start the 5GHz interface.
I tried changing Channel(Auto/36, etc), Width (20-80MHz), CountryCode Worldwide, US, germany, and rebooting several times.

Which configuration can work?

Is this a configuration problem or is the interface damaged?

1 Answer

0 votes
by anonymous

Hello,

Could you try to re-flash your firmware image via the bootloader menu? Instructions on how to do that can be found right here: https://wiki.teltonika-networks.com/view/RUTXxx_Firmware_via_The_Bootloader_Menu

Regards.

Best answer
by anonymous
Thank you very much. Your advice has helped.
I have updated the firmware online, do you have any idea why this way has not worked for me?
Shall I in future do it always via the bootloader way?
by anonymous
Hi,

Update via the bootloader menu completely wipes everything and installs fresh firmware without any redundant data left. Similarly, you could have tried to reset your device to the factory default configuration. I suppose you re-installed your firmware with keeping settings on before.

Regards.