Question

Hi,

cannot access the router web page via https or http.

I have access to the devices through the firewall but not the router isself.

I have checked the ports and there are no conflicts.

running the latest firmware.

I have access via RMS on the trial.

i cannot get to it to do a factrory reset, the distance is too far.

i need help..

Graham

Answer 1

Hello,

There you fill find all remote connections to the router options: https://wiki.teltonika-networks.com/view/Remote_WebUI_Access

Regards.

Answer 2

 https://wiki.teltonika-networks.com/view/Remote_WebUI_Access

i have followed the instructions above to the letter.

i have setup over 200 teltonika routers for web access, just cannot get this to work.

tried downgrading the firmware from 00.07.02 but it says the image is not valid.

 https://wiki.teltonika-networks.com/view/Remote_WebUI_Access

Answer 3

i got a valid firmware but i get this?

CONFIGURATION SETTINGS

Configuration files will be erased. Uploaded firmware image version is older than current firmware version.

VALIDATION SUCCEEDED

Below is the checksum and file size listed, compare them with the original file to ensure data integrity.
Checksums:
MD5: b482e18934599c2589c62f76c9ce003a
SHA256: 0bd68fbc7f76002329cd71fcd0025d7ef3c0533d70a04236e85df19fe4d7c39a
Size: 12.31 MB available

UNAUTHORIZED FIRMWARE

Uploaded firmware image is NOT digitaly signed by Teltonika Networks. Continue with caution.

Im guessing if i proceed i will loose access completely??? anyone?

Comments

Yes, if you will proceed, the configuration will be erased.

Could you share a screenshot of your remote access configuration?

Answer 4

screenshot attached