Question

System/administration/diagnostics _ping, dasnt work. Ping to lan device  10.170.6.1, 10.170.6.2.I -does not.I can see icmp request/replay in Wireshark.  Where colud br the problem? Thank.

Answer 1

Hello,

Which firmware version your RUT240 is currently on? Have you tried to ping exact same IP via CLI? What are the results?

Regards.

Comments

Hi , I have  FW ver.: RUT2XX_R_00.01.14.3   I tried ping CLi    

oot@euspko:~# ping 10.170.6.1

PING 10.170.6.1 (10.170.6.1): 56 data bytes

No succsefull.

I ping on DG PING 10.170.6.254 (10.170.6.254): 56 data bytes

64 bytes from 10.170.6.254: seq=0 ttl=64 time=0.567 ms

64 bytes from 10.170.6.254: seq=1 ttl=64 time=0.449 ms

64 bytes from 10.170.6.254: seq=2 ttl=64 time=0.412 ms

64 bytes from 10.170.6.254: seq=3 ttl=64 time=0.523 ms

64 bytes from 10.170.6.254: seq=4 ttl=64 time=0.382 ms

no problem.

I ping on wan 

PING 10.232.4.1 (10.232.4.1): 56 data bytes

64 bytes from 10.232.4.1: seq=0 ttl=64 time=0.568 ms

64 bytes from 10.232.4.1: seq=1 ttl=64 time=0.430 ms

64 bytes from 10.232.4.1: seq=2 ttl=64 time=0.378 ms

64 bytes from 10.232.4.1: seq=3 ttl=64 time=0.397 ms

no problem

Thanks

---

Normal ping from PC is default packet size 32 on RUT240 is default packet size 56
ping x.xxx.x.x -s 32 to 52 ok