Question

Team,

I am attempting to set up a Site to Site VPN across the RMS VPN.

Example:

RUT955 # 1: Local Lan 192.168.20.1/24

RUT955 # 2: Local Lan 192.168.21.1/24

I have created the routes within the RMS to allow the VPN Hub to route between them all, however, they are unable to pass through.

Can you confirm any other options required to be selected, modified?

Comments

Capture of current config

Answer 1

Hello,

You should double check the RMS VPN Hub > Routes settings. Here you must specify the IP address of the LAN device, not the gateway address of the router. Alternatively, you can set the entire subnet pool, like 192.168.20.0, 255.255.255.0.

An example of configuring a VPN Hub can be found here:

https://wiki.teltonika-networks.com/view/VPN_Hubs

Best regards.