Thanks for the quick reply, Sigitas!
Maybe I'm doing something wrong because of a different UI, let me check something please.
I'm on RUTX_R_00.02.06.1
1. In the guide General Setting of the VPN interface are hidden
Should I choose any protocol there or keep it as None?
2. Should the VPN interface be on status running when I click Save & Apply?
Is there any steps to debug if it is Stopped?
Here is my full if config after applying the settings (but my VPN interface status: Stopped)
br-lan Link encap:Ethernet HWaddr *
inet addr:192.168.10.1 Bcast:192.168.10.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:20779861 errors:0 dropped:0 overruns:0 frame:0
TX packets:24209793 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4912067707 (4.5 GiB) TX bytes:30105134255 (28.0 GiB)
br-wan Link encap:Ethernet HWaddr *
inet addr:174.* Bcast:174.* Mask:255.255.248.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:26538775 errors:0 dropped:0 overruns:0 frame:0
TX packets:22288449 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:31844034135 (29.6 GiB) TX bytes:6359032031 (5.9 GiB)
eth0 Link encap:Ethernet HWaddr *
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:21204825 errors:0 dropped:598 overruns:0 frame:0
TX packets:24210879 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:931266717 (888.1 MiB) TX bytes:40380770 (38.5 MiB)
eth1 Link encap:Ethernet HWaddr *
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:31076493 errors:0 dropped:281 overruns:0 frame:0
TX packets:22289134 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2446109181 (2.2 GiB) TX bytes:2061584416 (1.9 GiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:78 errors:0 dropped:0 overruns:0 frame:0
TX packets:78 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:6197 (6.0 KiB) TX bytes:6197 (6.0 KiB)
wlan1 Link encap:Ethernet HWaddr *
inet addr:192.168.11.1 Bcast:192.168.11.255 Mask:255.255.255.0
inet6 addr: fe80::21e:42ff:fe27:f0a1/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1613359 errors:0 dropped:0 overruns:0 frame:0
TX packets:2487770 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1160642157 (1.0 GiB) TX bytes:2159376295 (2.0 GiB)
Does it help?