Question

Hey guys, Its hard to explain what i want but I will do the best i can.

I have an rut240,

I have a cctv recorder which i want to have full acess to the lan and wan network.

I also want devices connected wirelessly to the rut240 to be able to access the recorder as well. whether they use the IP or P2P.

I don't however want any device that is connected to the rut240 to have access to the internet other than the recorder.

- rut240 configured for remote access and management; Done via RMS
- NVR configured to have access to the internet for remote monitoring and configuration
- Devices such as phones tablets, computers etc to have access to the NVR for viewing of cameras but no internet access.

any help is appreciated.

Answer 1

Hello,

You can try creating "traffic rules" on RUT240 so that only specified IP address could get access to WAN/LAN and that all other IP address will not have access to the internet.

More information: https://wiki.teltonika.lt/view/Firewall#Traffic_Rule_Configuration

Note.: router reads rules from top to bottom, so the first rule should be one which allows traffic.

Answer 2

Hi,

Traffic rules should look something like this: