subscribe to our Youtube
Thanks for contacting TELTONIKA | Crowd-support forum.
Please find below RUT955 power consumption values in different states of operation:
The router has a 4 pin power socket and can be powered by a 9-30 VDC power supply unit (PSU).
The device is designed to accept input voltage of up to 30 VDC peaks, high voltage power supplies can harm the device. If you want to use high voltage power supplies it is recommended to also use additional safety equipment to suppress voltage peaks from the power supply.
More information can be found here:
If you’re using Quectel, you can read ADC Value by typing the following command:
gsmctl -A 'AT+QADC=0'
If you’re using MEIG, you can read ADC Value by typing the following command:
gsmctl -A 'AT+ADCREAD=1'
@unox It would be possible to achieve this by utilizing a custom Modbus register. Then simply set up Data-to-Server as Data Source → Modbus, Protocol → MQTT and specify what you'd like to send.
For the custom register, the example provided in the article could be modified to the following (for Quectel modems):
Let me know if any more information is needed!
is it possible to forward the voltage cyclic to an local mqtt broker?