WIKIABOUT

FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

Most popular tags

rut955 rut240 rut950 rutx11 rms vpn to openvpn wifi not sms trb140 firmware connection - ipsec on rutx12 rutx09 modbus
We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.

RUT950_R_00.06.08.6 No General Setup under WAN --> Common Configuration

0 votes
134 views 1 comments
by anonymous

We are running RUT9XX_R_00.06.08.6 and I am configuring the WAN.

There is no "General Setup" tab shown under WAN --> Common Configuation as shown in the manual below.  I can only see the Advanced Settings tab under WAN --> Common Configuation.

Is there  a permission or special way to see the "General Setup" tab?

Reference

RUT950 WAN (legacy WebUI) - Teltonika Networks Wiki (teltonika-networks.com)

1 Answer

0 votes
by anonymous

Hello,

Could you please specify what exactly are you trying to configure, what settings are you looking for? Whether the “General setup“ tab is displayed or not depends on the WAN interface you want to configure, and for mobile interfaces it is not displayed. However, you can find general settings related to mobile connectivity in a separate page by going to “Network -> Mobile” in the WebUI.

Best regards,

Žygimantas

by anonymous

Thank you for the response. I understand the dependency. 

My concern is that in the routing table, the Network "ppp" for target "0.0.0.0/0" does not have a gateway (as shown below). I was hoping to specify the gateway. 

Network Target IP gateway Metric

ppp 0.0.0.0/0 0.0.0.0 1

ppp 10.x.x.x 0.0.0.0 1

lan 10.x.x.x./28 0.0.0.0 0