Question

Hi.

I need control mine RUTX11 from distance. But see only ERR_CONNECTION_REFUSED..

Internal IP IPV4 only. DHCP from 192.168.50.3 to 192.168.50.102.

Network->Firewall->Port Forwards

Name SPL. External port 8185. Internal port 192.168.50.1

Later:

Name: SPL

Protocol: TCP+UDP

Source zone: wan: wan, wan6, mob1s1a1, mob1s2s1.

Source MAC address: Any

Source IP address: Mine work IP

Source port: Any

External IP: Any

External port: 8185

Internal zone: Lan:lan

Internal IP 192.168.50.1

Internal port: 8185

NAT: On

Arguments: -c

Other functions, for example Wireguard and PPTP working fine, but when i want control RUTX11 from work place.. Heave problem.

Please help.

Answer 1

Hello, 

I would like to understand the situation a little better. 

1. What firmware version are you using on your RUTX11?

2. I see that the LAN IP is set to 192.168.50.1. When you try to connect to this IP, how are you connected to the router? By wifi, ethernet directly?

3. If you want to access the computer remotely, you will need a public IP. Either to access it directly or by setting up a VPN. In case you have it, it is possible that you do not have remote access active. To enable it, go to System → Administration → Access Control and enable remote access via ssh, WebUI, and remote CLI.