Question

Hey there,

I'm trying to figure out how can I configure a RUT955(WAN IP: 100.x.x.x) to ping from an equipment who is tagging the packets, behind this LTE router, over the internet to an address behind a Mikrotik router(WAN IP:158.x.x.x)

PC(192.168.1.111) from RUT955 side I can ping PC (10.10.10.1)from MikroTik side

I configured on RUT the vlan 555 and I gave the IP address 10.10.99.1 on this vlan

Equip(10.10.99.55) tagged vlan 555 can ping 10.10.99.1 but can NOT ping PC (10.10.10.1)from MikroTik side..

I played around with routing section but didn't manage to make it work. Could you please guide me how can I sorted out?

Thank you in advance!

Answer 1

Hi,

In RUT9 can not tag WAN side.

Comments

Hi Anonymouse,

It's fine for me no tagging on WAN side since I can ping from 192.168.1.111 (untagged) over the internet 10.10.10.1. I'm expecting the same for 10.10.99.55 (VLANID 555) that, at the time being, cannot ping 10.10.10.1. Here under the only config that I did it on RUT9. Thank you!

Network

Target

IP gateway

Metric

lan_TEST

10.44.99.0/24

0.0.0.0

0

lan

192.168.1.0/24

0.0.0.0

0

 

 VLAN Functionality

VLAN mode

 
Disabled
 Port based
Tag based  VLAN Networks List

Wireless access points

VLAN ID

RUT955_4C65

LAN

 

 
 Nonelan == lan
lanlan == lan_TEST
lan_TEST

555

 
 Nonelan_TEST == lan
lanlan_TEST == lan_TEST
lan_TEST

LAN Networks List

LAN name

Interface name

 

Lan

eth0 tap0

Lan_TEST

eth0.555

---

Seems like something is missing in your description.

How RUT and mikrotik is connected to each other?