FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
452 views 2 comments
by anonymous
Hello!
I use RUTX10 as l2tp server and RUT950 client. RUTX is with static ip and now i want access RUT950 local ip where is installed camera (ip 192.168.1.100). L2tp connection works and i can access both devices using l2tp network ip.

1 Answer

0 votes
by anonymous
Hi,

Thank you for contacting Teltonika Crowd-Support Forum.

I would like to ask you couple of questions to better understand your situation.

Are you able to Ping L2TP server's LAN network through Client's LAN network and vice-versa?
If not, Have you tried adding static route to be accessible via L2TP tunnel network?

Also, Would be please send the topology diagram, what exactly you are trying to achieve. It would be really helpful.
Are you trying to access camera using L2TP server's Public IP?

Regards
Ramandeep
by anonymous

i want access with server public ip, to client 1 and 2 cam-s, i dry crate port forward put this not work, and after RUT240 FW update l2tp connection works only ~1 minute.

I can ping in server client 1 l2tp ip, after client 2 firmware update ping not answer.

by anonymous

Hi,

You need to create two separate port forwarding rules on RUTX10 (L2TP Server). Also, make sure the LAN networks of each devices are able to ping each other. For this, you need to create static routes on all the 3 devices. Please follow the link below for static route configuration:
https://wiki.teltonika-networks.com/view/RUT240_Routing#Static_Routes
Please configure the Port Forwarding as follow on RUTX10 (L2TP Server):

Regards,
Ramandeep