Question

Hey,

Im trying to config Teltonika RUT360 Firewall>NAT Settings and trying to achieve this diagram. Not sure i need to sure SNAT settings or what. I want to get resources in WAN through LAN network (10.1.1.1). I need that the WAN side would see this Tablet as if it has 4G IP (88.16.25.2)

Answer 1

Hello, 

I think the application you are looking for is port forwarding. Here is a guide on how you can configure it.

https://wiki.teltonika-networks.com/view/RUT360_Firewall#Port_Forwards

This way you can enter the public IP of the router with the port configured and you should be able to reach the end device. 

Comments

I'm not sure if this is the right solution. What if my resorces that i want to reach have alot of ports and maybe they are dynamic also. So i have to create alot of port forwarding rules?

---

Hey, 

I thought you just wanted to reach some specific end device service. If you are going to need to access different ports on the end device then you can configure a NAT Translation 1-1. Here is a guide on how to set it up with custom rules.

https://wiki.teltonika-networks.com/view/RUTX_1-to-1_NAT