FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
173 views 1 comments
by anonymous

Hello,

With PDP set to IPV6 only I have:

root@lgrrutx:/etc/config# ifconfig wwan0
wwan0     Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
          inet6 addr: 2a02:8440:630b:79ae:8151:2931:d339:9e59/64 Scope:Global
          inet6 addr: fe80::8151:2931:d339:9e59/64 Scope:Link
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1358  Metric:1
          RX packets:722268 errors:0 dropped:0 overruns:0 frame:0
          TX packets:712765 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:531352280 (506.7 MiB)  TX bytes:473728301 (451.7 MiB)

root@lgrrutx:/etc/config# gsmctl -p mob1s2a1
2a02:8440:630b:79ae:8151:2931:d339:9e59

Good, the IPv6 address is returned, and in the standard hex format.

Now switch the PDP to IPv4 + IPV6:

​​​​​​​root@lgrrutx:/etc/config# ifconfig wwan0
wwan0     Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
          inet addr:100.65.16.115  P-t-P:100.65.16.115  Mask:255.255.255.255
          inet6 addr: 2a02:8440:6312:8316:8151:2931:d339:9e59/64 Scope:Global
          inet6 addr: fe80::8151:2931:d339:9e59/64 Scope:Link
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:722272 errors:0 dropped:0 overruns:0 frame:0
          TX packets:712781 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:531353158 (506.7 MiB)  TX bytes:473730585 (451.7 MiB)

root@lgrrutx:/etc/config# gsmctl -p mob1s2a1
100.65.16.115

The IPv6 part has disappeared, in older versions ( <= 07.01.4) it was present albeit in a odd decimal format still present in gsmctl -A "AT+CGPADDR=1" :

root@lgrrutx:~# gsmctl -A "AT+CGPADDR=1"
+CGPADDR: 1,"100.93.27.205,42.2.132.64.97.15.209.216.0.0.0.46.211.251.27.1"
The %mi format in the events reporting subsystem exhibits the same issue.
Regards,

1 Answer

0 votes
by anonymous
Hello,

Thank you for another observation. RnD will be informed on this.

Best regards,
by anonymous
This issue is not fixed in version 07.02.6 and modem firmware EG06ELAR04A08M4G.

Regards,