WIKIABOUT

FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

Most popular tags

rut955 rut240 rut950 rutx11 rms vpn to openvpn wifi not sms trb140 firmware connection - ipsec on rutx12 rutx09 modbus
We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.

Commissioning without webUI

0 votes
126 views 1 comments
by anonymous
Is there a way to get the RUT955 up and running without a webUI, for example via SSH? I would like to start up the device automatically (without anyone having to log in), is there a communication path to the modem that is open in the delivery state?

1 Answer

0 votes
by anonymous

Hello,

You can definitely run the router using CLI/SSH. Please check the following page: https://wiki.teltonika-networks.com/view/Command_Line_Interfaces.

Since you are using RUT955, you can configure serial rs232/485 to operate in Modem mode, which allows you to directly device's modem using AT commands.

Could you explain, what do you mean by “the delivery state“?

Best regards,

by anonymous
The modem is part of an EdgeProcessingUnit (EPU). The EPU is automatically put into operation, the only manual procedure that has to be done is to update modem firmware and apply configuration (restore backup) by the WebUI.

My goal is to find a way how to setup the modem automatically - To do so a communication path (e.g. SSH) needs to be open in the delivery state. If I have to activate the communication path, I can also stay with the previous procedure.